They both have all of the great features mentioned above, but differ in the location of the grease fitting. We accomplished this by making two slightly different designs, instead of a "one size fits all" design. These custom bushings will allow enough flex for comfortable street driving, but also be stiff enough to perform under the most severe racing conditions.Īnother goal was to have the best possible bushings in both the rear control arms and the top ears/brackets on the rearend housing. This will eliminate any possible binding or squeaking, and allow quicker movement for improved performance. Once there, the grease coats the inner spacer 360 degrees around, through several grooves in the poly bushings. The grease enters an area between the two poly bushing inserts, and is directed to the inner spacer. The biggest improvement over other bushings currently available is that we added a lubrication system to ours, including a grease fitting. The outer shell is also much thicker to reduce any unwanted flexing, and plated for rust prevention. It will also have the same custom modified inner steel spacer and Poly bushings that our new control arms have. It is designed to ride exceptionally well on the street, and perform exceptionally well at the track. This will be an OEM replacement type bushing, except that it will be stiffer than stock. One type will be a custom bushing made to match our new control arms. Extra gains can be found from not allowing the suspension to flex excessively and change their location/settings. Stiffer bushings will increase performance both in acceleration and handling. The factory bushings are extremely soft, and not acceptable for performance applications. We have designed the optimum OEM replacement suspension bushings that replace the stock rear control arm bushings.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |